From scratch
Low TV stand.
Two doors, an open bay for the soundbar and tapered legs. A weekend build.
- Width
- 1,800 mm
- Height
- 480 mm
- Depth
- 400 mm
Starting size in 18 mm walnut-veneered plywood. Every measurement can change.
Start from this templateMake it yours
Change the numbers to match your room.
About this template
A TV stand is mostly about what you don’t see: cables, a router, a console that needs air. The open centre bay takes the equipment that needs a remote signal and ventilation, and the closed sides hide the rest.
Cable holes are part of the plan, so they end up behind the equipment and not wherever the drill happened to land.
What you can change
- Width, to suit the screen
- Height, so the screen sits at eye level from the sofa
- Doors, drawers or open bays
- Cable holes and ventilation
Related templates
Or start from one of these.
- Uses IKEA BESTÅ
BESTÅ floating media unit
Wall-hung frames under one continuous oak top, with cable routes drawn in.
- From scratch
Alcove bookshelves
Scribed into a chimney-breast alcove: cupboard below, adjustable shelves above.
- From scratch
Freestanding bookcase
A simple open bookcase with fixed shelves. The right first project.
- From scratch
Floating shelves
Hollow-core shelves on a hidden cleat. The drilling sheet locates every fixing.
What would you build if it only had to fit your room?
Show Caminu your room and describe the piece. You get the 3D model, the cut list and the assembly guide.