Uses IKEA BILLY
BILLY built-in bookcase.
Three units, wall to wall, with a plinth, face frame and crown so it reads as joinery.
- Width
- 2,400 mm
- Height
- 2,370 mm
- Depth
- 280 mm
Starting size in painted MDF trim on existing frames. Every measurement can change.
Start from this templateMake it yours
Change the numbers to match your room.
About this template
Three BILLY units side by side leave a gap at each wall and a space under the ceiling. This plan fills them: a plinth to lift the units to skirting height, filler strips scribed to the walls, a face frame to hide the joins and a crown to meet the ceiling.
You only cut the new parts. The list covers the plinth, fillers, face frame and crown.
What you can change
- Number of BILLY units, with or without height extensions
- Wall width and ceiling height
- Plinth and crown heights
- Doors on the lower section, or open all the way
Related templates
Or start from one of these.
- From scratch
Alcove bookshelves
Scribed into a chimney-breast alcove: cupboard below, adjustable shelves above.
- From scratch
Freestanding bookcase
A simple open bookcase with fixed shelves. The right first project.
- From scratch
Floating shelves
Hollow-core shelves on a hidden cleat. The drilling sheet locates every fixing.
- Uses IKEA PAX
PAX fitted wardrobe
Floor-to-ceiling fronts and scribed filler panels turn three frames into a fitted wall.
What would you build if it only had to fit your room?
Show Caminu your room and describe the piece. You get the 3D model, the cut list and the assembly guide.